🚀 Lifetime Access launches soon. Create a free account to grab free models now.

Loading 3D model…

Drag to rotate · scroll to zoom · actual print file

Free Made by humans

Film Cartridge for Agfa Rapid Cameras

A 3D-printable film cartridge for AGFA Rapid film cameras

by JennyList

Materials
PLA
Multicolor
Single color
Supports
None needed

License: Creative Commons Attribution-ShareAlike 4.0

Commercial use is allowed under this license. Credit the author where required. Learn more

About this model

A 3D-printable film cartridge for Agfa Rapid film cameras The Rapid film system was Agfa's answer to Kodak's 126 cartridge back in the 1960s, a quick-loading 35mm film format. It was based on an earlier Agfa cartridge, with the addition of a tab to select film speed. This is a 3D-printable Rapid cartridge, which can be loaded with 35mm film. The STL is for an ISO 100 cartridge, while examining the OpenSCAD file you'll find any of the available ISO settings can be selected. The cartridge and lids should be printed, then a set of two felt light seals should be glued along the opposite sides of the film opening. I used the soft side of a piece of black velcro, but a strip of black felt can also be used. Use a knife blade to keep the two felt pieces from sticking to each other. Once the glue has set, the felt can be trimmed at each end and the end pieces can be glued into place. Designed by JennyList and shared under CC BY-SA 4.0. The ZIP includes every part and the original README.

Part of

More like this