Loading 3D model…
Drag to rotate · scroll to zoom · actual print file
Free Made by humans
Desk Hub: Modular Laptop Riser & Organizer
Modular 3D-printed laptop riser with cable trays, a document slot and organizers
by FormalSnake
Create a free account to download
Already have one? Log in
- Materials
- PLA
- Multicolor
- Single color
- Supports
- None needed
License: Creative Commons Attribution-ShareAlike 4.0
Commercial use is allowed under this license. Credit the author where required. Learn more
About this model
A modular laptop riser. The laptop sits 55 mm up on two rails, with a cable tray along each side, a cable channel underneath, a slot for A4 documents, and organizers that slide into sockets on the trays. A vertical stand reuses the same parts.
It's sized for the ASUS ROG Strix G18 (2025, G815), but every length comes from `laptop_d` and `laptop_w` in `desk-hub.scad`, so it fits any laptop once you measure it. Every part fits a 256 mm bed (Bambu Lab P1S) and locks with printed keys, so you need no glue, screws or inserts.
Two cheeks carry the laptop on 20 mm rails along its edges, which leaves the bottom intake open. Stops at both ends and lips on both sides allow 1 mm of play, so the laptop can't slide off. The lid opens fully, with nothing above the deck.
Each cheek is three identical segments plus two identical end caps, keyed together. Every part works either way round, so ports can face you or the wall, and the spine and document slot can go at either end.
Designed by FormalSnake and shared under CC BY-SA 4.0. The ZIP includes every part and the original README.

