🚀 Lifetime Access launches soon. Create a free account to grab free models now.
← All guides

Projects · 6 min read

Vase mode, planters and lamp shades: how to print home decor that looks bought

How spiral vase mode works, which filament to use for planters and lamp shades, self-watering pots, drainage, and the bulb rule that keeps printed shades safe.

Planters, vases and lamp shades are some of the most popular home prints, and among the easiest to get right. Most of them use one slicer trick: vase mode.

What vase mode is

Vase mode (called "spiral vase" or "spiralize outer contour" in slicers) prints the bottom, then one continuous wall that spirals upward. There are no seams, no travel moves and no top layer.

  • Pros: fast, smooth, no seam line, very little filament.
  • Cons: only one wall, so the part is thin and not watertight on every printer. There is no infill and no top.

To use it, turn on spiral vase mode, set 3 to 5 bottom layers and 0% infill. A wider line (0.6 to 0.8 mm with a 0.4 mm nozzle) makes a much stronger wall.

Not every model works in vase mode. It needs a single closed outer wall, with no holes or overhangs inside.

Planters

Where it lives Filament
Indoors, dry Matte PLA
Indoors, watered often PETG
Outdoors PETG or ASA (UV resistant)
  • Drainage: a pot with no hole drowns most plants. Use a printed pot as a cover for a plastic nursery pot, or pick a design with drainage and a saucer.
  • Watertight prints: use 3 or more walls (not vase mode) and a little extra flow. Test with water in the sink before adding soil.
  • Self-watering pots keep a reservoir under the soil and wick water up. They are great for herbs and forgetful owners. Several in Plant Parent include a water level gauge.

Lamp shades

The rule: use LED bulbs only. Incandescent and halogen bulbs run hot enough to soften PLA over time. A warm-white LED at 5 to 9 W gives off very little heat.

  • White or natural PLA diffuses light best. Translucent PETG glows nicely too.
  • Check the fitting: many shades are made for E27 (standard U.S. size E26 is close) or E14 sockets, or for a threaded M40 ring. Measure before you print.
  • Single-wall shades glow evenly. Patterned shades like the Flower of Life throw shadows on the wall.
  • Leave space between the bulb and the shade, at least 2 to 3 cm.

Find shades and LED tea light holders in Cozy Lighting.

Candle holders

Printed candle holders are for LED tea lights only. Plastic softens and can burn near an open flame.

Bird feeders

Feeders live outdoors in sun and rain, so print them in PETG or ASA. Bottle feeders reuse a soda bottle as the seed hopper, which makes a nice weekend project with kids.

Related: PLA vs PETG and Useful things to 3D print.

Want models that are already set up for your printer?

Every Trove3D file ships with a tested 3MF profile. Start with three free ones.

Get the Free Starter Pack