Paint turns a plastic print into something that looks cast, carved or store-bought. It is especially worth it on museum scans, figurines, cosplay-style props and display pieces. The workflow is always the same: prep, sand, prime, paint, seal.
What you need
- Flush cutters and a hobby knife
- Sandpaper or sanding sponges: 120, 220, 400 and 600 grit
- Filler primer in a spray can (often in the auto parts aisle)
- Acrylic paints and brushes, or spray paint made for plastic
- Clear coat (matte, satin or gloss)
- A mask or respirator, gloves and good ventilation
1. Print for painting
- Use 0.12 to 0.16 mm layers on detailed pieces, which means far less sanding.
- Orient visible faces away from supports. See Supports and orientation.
- Gray or white PLA is easiest to cover.
2. Clean up and sand
- Remove supports and trim stubs with flush cutters.
- Sand with 120 to 220 grit to knock down layer lines and support marks. Keep the sandpaper moving: friction heat softens PLA.
- Fill gaps or seams with a little putty or filler.
- Wipe the dust off with a damp cloth.
3. Prime
Primer does two jobs: paint sticks to it, and it shows every flaw you missed.
- Shake the can well. Spray 20 to 30 cm away in light, sweeping passes.
- Filler primer fills fine layer lines. Two or three coats with light sanding (400 grit) in between makes a smooth surface.
- Let it dry fully before painting, usually an hour or more.
4. Paint
- Thin coats beat thick ones. Three thin coats look better than one heavy coat and keep the details sharp.
- Spray paint is easiest for large, single-color pieces.
- Acrylics suit figurines and details. Thin them slightly with water.
- Washes (thinned dark paint) flow into recesses and bring out details on scans and statues.
- Dry brushing (a nearly dry brush with a light color) catches raised edges. It makes stone, metal and bone look real.
- Use paint and primer from the same brand when you can, so they are compatible.
5. Seal
A clear coat protects the paint from chips and fingerprints. Use matte for stone and bone, satin for most models and gloss for cars and toys.
Quick finishes that look great
- Stone: gray primer, a dark wash, then a light dry brush.
- Bronze: dark brown base, metallic bronze dry brush, then a touch of green-blue patina in the recesses.
- Marble: white base with thin gray veins, then a satin coat.
These finishes suit the Museum Masterpieces and Fossil Lab scans.
Safety
Sand and spray outdoors or in a ventilated room. Wear a mask when sanding and a respirator when spraying, and keep paints away from kids and pets.
Related: Printing museum scans.