Modular organization systems are some of the most printed things in the world. Instead of designing a holder for every tool, you print a base grid once and then add bins and holders that snap into it. Here is how the main systems compare.
The short answer
- Drawers and desktops: Gridfinity
- A bare wall in a garage or workshop: Multiboard or openGrid
- You already own a metal or wooden pegboard: printed pegboard hooks and bins
Gridfinity
Gridfinity was introduced by Zack Freedman in 2022. It is built on a 42 × 42 mm grid: you print baseplates that fit your drawer and bins that sit on them, in any multiple of the grid.
Why people love it:
- Thousands of community bins exist for screwdrivers, bits, batteries, SD cards, makeup and kitchen tools.
- Generators let you type in a drawer size and download a fitted baseplate.
- Bins lift out, so you can carry a set of tools to the job.
Licensing: the original Gridfinity design is open source under the MIT license. Community bins have their own licenses. Check each file before you sell prints.
Starter plan: one 4 × 4 baseplate and six assorted bins is a weekend project, roughly 10 hours and 200 g of PLA. Measure your drawer first and leave 1 to 2 mm of play.
Multiboard
Multiboard is a wall system: hexagonal-hole tiles that screw to the wall and accept clips, hooks, shelves and bins. It is strong enough for heavy tools.
Licensing: the core Multiboard files are free for personal use but carry a non-commercial license, so you cannot sell prints of them without permission. Read the current terms on the official site.
openGrid
openGrid is a newer, open wall and under-desk grid that many makers like because tiles are thin and quick to print. It is popular for cable management under desks.
Printed pegboard accessories
If you already have a pegboard (1/4-inch holes on 1-inch centers in the U.S.), printed hooks, bins and tool holders are the fastest win: no new wall system needed.
Which one should you print?
| You want to organize... | Best fit |
|---|---|
| Tool, desk or kitchen drawers | Gridfinity |
| A garage or workshop wall | Multiboard or openGrid |
| Under the desk (cables, power strips) | openGrid |
| An existing pegboard | Printed pegboard hooks |
Tips that save filament
- Print a single test bin before committing to a full drawer: tolerances vary between printers.
- Use 2 walls and 10 to 15% infill for bins. They do not need to be strong.
- Vase mode (spiral, one wall) makes very light bins for light items.
- Label as you go. Many bins have a label shelf: print small labels in a second color.
Free organization files on Trove3D
Every file in our Open Library is commercial-friendly. Browse the Home & Organization and Workshop categories for bins, hooks, cable clips and holders, and see the Drawer to Garage collection. Our Free Finds also link to the large Gridfinity and Multiboard libraries on other sites.