Every Trove3D premium model includes a Bambu Lab-ready 3MF project with plates laid out, supports placed, and AMS colors preset, based on our own test prints. This guide covers the few checks before you hit print: opening the file the right way, matching filaments, adjusting for your printer, and re-slicing. OrcaSlicer notes are at the end.
Open as project vs. import geometry only
When you open a 3MF in Bambu Studio, you will usually see a dialog asking how to load it. The choice matters.
- Open as project loads everything: plates, object placement, supports, color assignments, and the print settings saved in the file. This is what you want for our files.
- Import geometry only loads just the shapes. All the plate layout, painted supports, and color work is discarded, and Bambu Studio applies your current default settings instead.
Use File > Open Project, or double-click the 3MF. If you drag it onto an existing project, choose project unless you want to add the model to what you already have open. If Bambu Studio warns that the file contains custom settings, that is expected; accept them to keep our tested values.
Tour the plates
Multi-part models often come with several plates, shown as numbered tabs around the build area. Click through each one before slicing. Use "Slice plate" for one or "Slice all" for every plate. You do not need to print them in order unless the model's notes say so.
Choose filament slots
The filament panel on the left lists the filaments the project uses, numbered 1, 2, 3, and so on. Each slot has a color swatch and a filament type.
These are the colors we planned for, not necessarily what you have. To change one:
- Click the color swatch to pick a color that matches your spool, so the preview looks right.
- Click the filament type dropdown to choose your exact filament profile (for example, Bambu PLA Basic or a generic PLA). This affects temperatures and flow, so pick the closest match.
Changing a slot's color does not change which parts are assigned to it. Everything painted with filament 2 stays filament 2. You are only telling Bambu Studio what filament 2 actually is.
If you want a part in a different slot, right-click the object (or select it and use the object list) and change its filament assignment there.
AMS mapping
When you click Print, Bambu Studio shows a send dialog with AMS mapping. This is where project filament slots get matched to the physical slots in your AMS.
- Bambu Studio tries to match automatically by type and color. Check each one.
- If a mapping is wrong, click it and pick the correct AMS slot.
- If you have the AMS synced in Bambu Studio (via the sync button on the filament panel), the slicer can read what is loaded and match more accurately.
A mismatched type (say, PETG mapped to a PLA spool) usually triggers a warning. Take it seriously.
No AMS? Print each color's parts separately, or use an external spool for single-color models.
Changing the printer profile: A1, P1S, X1C
Our files are prepared on Bambu Lab printers, but the project may have been saved with a different model than yours. To switch:
- Open the printer dropdown at the top of the left panel.
- Select your printer and nozzle size, for example Bambu Lab A1 0.4 nozzle.
- Bambu Studio may ask whether to keep the project's modified settings or switch to the new printer's defaults. Choose to keep (transfer) the modified settings so you keep the tested layer heights, support settings, and wall counts.
A few things to watch when switching:
- Bed size. The A1, P1S, and X1C all share a 256 x 256 mm bed, so plates generally transfer cleanly. The A1 mini has a 180 x 180 mm bed, and larger plates will not fit. Rearrange parts across plates or use Arrange (shortcut A) on new plates.
- Nozzle size. If you change nozzle size, layer height limits change too. Recheck the preview.
Re-slice and check the preview
Any time you change printer, filament, or plate layout, slice again. Then take a minute in the preview:
- Scroll the layer slider and watch the first layer, support areas, and any thin details.
- Switch the color scheme to "Filament" to confirm each part prints in the color you expect.
- Glance at the estimated time and filament use per color, and make sure you have enough on each spool.
If everything looks right, send it to the printer.
When to change settings
Matching filament profiles, adding a brim, or scaling a decorative model are all reasonable. Be cautious about removing painted supports or changing orientation; those choices usually exist because something failed without them.
OrcaSlicer notes
OrcaSlicer is a community slicer based on Bambu Studio, and it opens our 3MF projects well.
- Use File > Open Project to load plates, supports, and colors.
- Orca may show its own dialog about loading project settings. Load them to keep our tested values.
- Printer and filament profile names differ slightly, so select your printer and filaments from Orca's list after opening.
- AMS mapping works when Orca is connected to your printer through its device tab. Otherwise, slice, export the file, and send it with your usual workflow.
PrusaSlicer and other slicers can open the STL files included with every download, though they will not read Bambu-specific plate and color data.
Ready to print
Open as project, check filament slots, confirm AMS mapping, set your printer, and re-slice. New to multicolor? Our guide to AMS multicolor printing goes deeper, and you can see what is in this month's collection on the Drops page.